Installation: Difference between revisions
(Created page with "= Building SerialICE = $ cd SerialICE $ make menuconfig $ make You can now flash the 64KB serialice.rom onto your mainboard's ROM chip (you must pad or "multiply" it t...") |
No edit summary |
||
| Line 1: | Line 1: | ||
= Building SerialICE = | = Building SerialICE = | ||
Take note of the size of the flash chip you will use for SerialICE and set that correctly while in menuconfig. | |||
$ cd SerialICE | $ cd SerialICE | ||
| Line 5: | Line 7: | ||
$ make | $ make | ||
You can now flash the | You can now flash the serialice.rom image. You can execute flashrom on the target machine like this: | ||
$ flashrom -p internal -w serialice.rom | |||
You can also use external programmer devices. In either case, keep a copy of the original mainboard bios image, preferably use a different chip for SerialICE purposes. After programming the flash, do a cold reboot of the target machine. | |||
Next check with a terminal program of your choice (eg [http://alioth.debian.org/projects/minicom minicom], [http://code.google.com/p/picocom/ picocom]) that you are seeing a SerialICE shell prompt. If you do not get a prompt, see [[Make_SerialICE_work_on_new_hardware]]. | |||
SerialICE v1.5 (Nov 20 | SerialICE v1.5 (Nov 20 2012) | ||
> | > | ||
CTRL-A Z for help |115200 8N1 | NOR | Minicom 2.3 | VT102 | Offline | CTRL-A Z for help |115200 8N1 | NOR | Minicom 2.3 | VT102 | Offline | ||
| Line 21: | Line 24: | ||
$ sh build.sh | $ sh build.sh | ||
You are now ready to start using SerialICE. [[Getting Started]] provides an intro to using SerialICE, [[Debugging]] | You are now ready to start using SerialICE. [[Getting Started]] provides an intro to using SerialICE, while [[Log_file]] explains the output format. Advanced topics like [[Debugging]] have information about using gdb with SerialICE targets, and [[Scripting]] describes the basics of writing filters to match the hardware. | ||
Latest revision as of 11:58, 9 March 2013
Building SerialICE
Take note of the size of the flash chip you will use for SerialICE and set that correctly while in menuconfig.
$ cd SerialICE $ make menuconfig $ make
You can now flash the serialice.rom image. You can execute flashrom on the target machine like this:
$ flashrom -p internal -w serialice.rom
You can also use external programmer devices. In either case, keep a copy of the original mainboard bios image, preferably use a different chip for SerialICE purposes. After programming the flash, do a cold reboot of the target machine.
Next check with a terminal program of your choice (eg minicom, picocom) that you are seeing a SerialICE shell prompt. If you do not get a prompt, see Make_SerialICE_work_on_new_hardware.
SerialICE v1.5 (Nov 20 2012) > CTRL-A Z for help |115200 8N1 | NOR | Minicom 2.3 | VT102 | Offline
Building QEMU
You need to build a patched QEMU from source, and you will need Lua >= 5.2. To build Qemu you can run the build script that was added by the SerialICE patch:
$ sh build.sh
You are now ready to start using SerialICE. Getting Started provides an intro to using SerialICE, while Log_file explains the output format. Advanced topics like Debugging have information about using gdb with SerialICE targets, and Scripting describes the basics of writing filters to match the hardware.