Installation

Building SerialICE

Take note of the size of the flash chip you will use for SerialICE and set that correctly while in menuconfig.

 $ cd SerialICE
 $ make menuconfig
 $ make

You can now flash the serialice.rom image. You can execute flashrom on the target machine like this:

 $ flashrom -p internal -w serialice.rom

You can also use external programmer devices. In either case, keep a copy of the original mainboard bios image, preferably use a different chip for SerialICE purposes. After programming the flash, do a cold reboot of the target machine.

Next check with a terminal program of your choice (eg minicom, picocom) that you are seeing a SerialICE shell prompt. If you do not get a prompt, see Make_SerialICE_work_on_new_hardware.

 SerialICE v1.5 (Nov 20 2012)
 > 
 CTRL-A Z for help |115200 8N1 | NOR | Minicom 2.3    | VT102 |      Offline  

Building QEMU

You need to build a patched QEMU from source, and you will need Lua >= 5.2. To build Qemu you can run the build script that was added by the SerialICE patch:

 $ sh build.sh

You are now ready to start using SerialICE. Getting Started provides an intro to using SerialICE, while Log_file explains the output format. Advanced topics like Debugging have information about using gdb with SerialICE targets, and Scripting describes the basics of writing filters to match the hardware.